Products
-
AWWA C504 Centerline Butterfly Valve
AWWA C504 is the standard for rubber-sealed butterfly valves specified by the American Water Works Association. The wall thickness and shaft diameter of this standard butterfly valve are thicker than other standards. So the price will be higher than other valves
-
Ductile Iron SS304 SS316 Non-return Swing Check Valve
Non-return swing check valve are used in pipes under pressure between 1.6-42.0. Working temperature between -46℃-570℃. They are widely used in industries include oil,chemistry, pharmaceutical and power generation to prevent the back flow of the medium. And the same the time, the valve material can be WCB,CF8,WC6, DI and etc.
-
150LB 300LB WCB Cast Steel Gate Valve
WCB cast steel gate valve is the most common hard seal gate valve, the price is much cheaper compared to CF8, but the performance is excellent, we can do DN50-DN600 according to customer requirements. pressure level can be from class150-class900. suitable for water, oil and gas, steam and other media.
-
Stainless Steel Flange Type Floating Ball Valve
The ball valve does not have a fixed shaft, known as floating ball valve. The floating ball valve has two seat seals in the valve body, clamping a ball between them, the ball has a through hole, the diameter of the through hole is equal to the inner diameter of the pipe, called the full diameter ball valve; the diameter of the through hole is slightly smaller than the inner diameter of the pipe, called the reduced diameter ball valve.
-
Fully WELDED STEEL BALL VALVE
The steel fully welded ball valve is a very common valve, its main feature is that because the ball and the valve body are welded into one piece, the valve is not easy to produce leakage during use. It is mainly composed of valve body, ball, stem, seat, gasket and so on. The stem is connected to the valve handwheel through the ball, and the handwheel is rotated to turn the ball to open and close the valve. Production materials vary according to the use of different environments, media, etc., mainly carbon steel, stainless steel, alloy steel, cast steel, etc.
-
DI PN10/16 class150 Long Stem Soft Sealing Gate Valve
Depending on the working conditions, our soft sealing gate valves sometimes need to be buried underground, which is where the gate valve needs to be fitted with an extension stem to enable it to be opened and closed.Our long stem gte valves are also available with handwheels, electric actuator, pneumatic actuator as their operator.
-
DI SS304 PN10/16 CL150 Double Flange Butterfly Valve
This double flange butterfly valve use the materials ductile iron for valve body, for the disc, we choice materials SS304, and for the connection flange, we offer the PN10/16, CL150 for your choice, This is centerlined butterfly valve. Windly used in Food, medicine, chemical, petroleum, electric power, light textile, paper and other water supply and drainage, gas pipeline for regulating the flow and cut off the role of fluid.
-
DI PN10/16 class150 Soft Sealing Gate Valve
DI body is the most common material used for soft sealing gate valves. Soft seal gate valves are divided into British Standard, American Standard and German Standard according to design standards. Pressure of soft seal butterfly valves can be PN10,PN16 and PN25.Depending on the installation conditions, rising stem gate valves and non-rising stem gate valves are available to choose.
-
DI PN10/16 Class150 Soft Sealing Rising Stem Gate Valve
Soft sealing gate valve are divided in rising stem and non rising stem. Usually, rising stem gate valve is expensive than non rising stem gate valve. Soft sealing gate valve body and gate are usually made of cast iron and the sealing material is usually EPDM and NBR. Nominal pressure of the soft gate valve is PN10,PN16 or Class150. We can choose the suitable valve according the medium and pressure.
-
SS/DI PN10/16 Class150 Flange Knife Gate Valve
Depending on the medium and working conditions, DI and stainless steel are available as valve bodies, and our flange connections are PN10, PN16 and CLASS 150 and etc. The connection can be wafer, lug and flange. Knife gate valve with flange connection for better stability. Knife gate valve has the advantages of small size, small flow resistance, light weight, easy to install, easy to disassemble, etc.
-
DI CI SS304 Flange Connection Y Strainer
Y-type flange filter is a necessary filter equipment for hydraulic control valve and precise mechanical products. It is usually installed at the inlet of hydraulic control valve and other equipment to prevent particulate impurities from entering into the channel, resulting in blockage, so that the valve or other equipment can not be used normally. The strainer has the advantages of simple structure, small flow resistance,and can remove dirt on line without removal.
-
DI PN10/16 Class150 Lug Knife Gate Valve
The DI body lug type knife gate valve is one of the most economical and practical knife gate valves. The main components of a knife gate valve consist of the valve body, knife gate, seat, packing and valve shaft. Depending on the needs, we have rising stem and non-rinsing stem knife gate valves.
