News
-
Ductile Cast Iron Butterfly Valve Handle
The ductile cast iron butterfly valve is one of the most common and widely used butterfly valves of our material, and we usually use the handle to open and close the butterfly valve below DN250. At ZFA Valve, we have a wide range of handles available in different materials and prices for our clients to choose, such as cast iron handles, steel handles and aluminium handles.
-
DN100 PN16 Butterfly Valve Lug Body
This DN100 PN16 fully lugged butterfly valve body made of ductile iron, and for replaceable soft back seat, it can be used at the end of pipeline.
-
Wafer Type Fire Signal Butterfly Valve
The fire signal butterfly valve usually has a size of DN50-300 and a pressure lower than PN16. It is widely used in coal chemical, petrochemical, rubber, paper, pharmaceutical and other pipelines as a diversion and confluence or flow switching device for media.
-
F4 Bolted Bonnet Soft Sealing Rising Stem OSY Gate Valve
Bolted bonnet gate valve refers to a gate valve whose valve body and bonnet are connected by bolts. The gate valve is a linear up and down motion valve that controls the flow of fluid by raising or lowering the wedge-shaped gate.
-
Casting Iron Body EPDM Hard Back Seat Wafer Butterfly Valve
Casting iron hard back seat wafer butterfly valve, body material is casting iron, disc is ductile iron, seat is EPDM hard back seat, manual lever operation.
-
EPDM Replaceable Seat Ductile Iron Lug Type Butterfly Valve Body
Our ZFA valve have different model for lug type butterfly valve body for our clients and also can customized. For the lug type valve body material, we can be CI,DI,stainless steel,WCB, bronze and etc.
-
Short Pattern U Shape Double Eccentric Butterfly Valve
This short pattern double offset butterfly valve has thin Face o face dimension, which has the same structural length as the wafer butterfly valve. It is suitable for small space.
-
Worm Gear Grooved Butterfly Valve Fire Signal Remote Control
The groove butterfly valve is connected by a groove machined at the end of the valve body and a corresponding groove at the end of the pipe, rather than a traditional flange or threaded connection. This design simplifies installation and allows for faster assembly and disassembly.
-
Grooved Type Butterfly Valve for Fire Fighting
The groove butterfly valve is connected by a groove machined at the end of the valve body and a corresponding groove at the end of the pipe, rather than a traditional flange or threaded connection. This design simplifies installation and allows for faster assembly and disassembly.