Flange Type Butterfly Valve

  • PTFE Seat Flange Type Butterfly Valve

    PTFE Seat Flange Type Butterfly Valve

     PTFE’s acid and alkali resistance is relatively good, when the ductile iron body with PTFE seat, with stainless steel plate, butterfly valve can be applied in the medium with acid and alkali performance, this configuration of the butterfly valve broadens the use of the valve.

     

  • PN16 CL150 Pressure Flange Type Butterfly Valves

    PN16 CL150 Pressure Flange Type Butterfly Valves

    The Flange centerline butterfly valve, can be used for pipeline flange type PN16, Class150 pipeline, ball iron body, hanging rubber seat, can reach 0 leakages, and is a very should welcome butterfly valve. The maximum size of the midline flange butterfly valve can be DN3000, commonly used in water supply and drainage, HVAC systems, and hydropower station systems.

     

  • Electric Actuator Flange Type Butterfly Valves

    Electric Actuator Flange Type Butterfly Valves

      The function of the electric butterfly valve is to be used as a cut-off valve, a control valve and a check valve in the pipeline system. It is also suitable for some occasions that require flow regulation. It is an important execution unit in the field of industrial automation control.

  • EN593 Replaceable EPDM Seat DI Flange Butterfly Valve

    EN593 Replaceable EPDM Seat DI Flange Butterfly Valve

    A CF8M disc, EPDM replaceable seat, ductile iron body double flange connection butterfly valve with lever operated can meet the standard of EN593, API609, AWWA C504 etc, and suitable for the application of Sewage treatment, water supply and drainage and desalination even food manufacturing.

  • Ductile Iron Body Worm Gear Flange Type Butterfly Valve

    Ductile Iron Body Worm Gear Flange Type Butterfly Valve

    The ductile iron turbine butterfly valve is a common manual butterfly valve. Usually when the valve size is larger than DN300, we will use the turbine to operate, which is conducive to the opening and closing of the valve.The worm gear box can increase the torque, but it will slow down the switching speed. Worm gear butterfly valve can be self-locking and will not reverse drive. Maybe there is a position indicator.

  • U Section Flange Butterfly Valve

    U Section Flange Butterfly Valve

     U-section butterfly valve is Bidirectional sealing, excellent performance, small torque value, can be used at the end of the pipe for emptying valve, reliable performance, seat seal ring and valve body organically combined into one, so that the valve has a long service life

  • Electric WCB Vulcanized Seat Flanged Butterfly Valve

    Electric WCB Vulcanized Seat Flanged Butterfly Valve

    An electric butterfly valve is a type of valve that uses an electric motor to operate the disc, which is the core component of the valve. This type of valve is commonly used to control the flow of liquids and gases in various industrial applications. The butterfly valve disc is mounted on a rotating shaft, and when the electric motor is activated, it rotates the disc to either completely block the flow or allow it to pass through,

  • Bare Shaft Vulcanized Seat Flanged Butterfly Valve

    Bare Shaft Vulcanized Seat Flanged Butterfly Valve

    The biggest feature of this valve is the dual half-shaft design, which can make the valve more stable during the opening and closing process, reduce the resistance of the fluid, and is not suitable for pins, which can reduce the corrosion of the valve plate and valve stem by the fluid.

  • Flange Butterfly Valve with Supporting Legs

    Flange Butterfly Valve with Supporting Legs

     Usually when the nominal size of the valve is greater than DN1000, our valves come with support legs, which makes it easier to place the valve in a more stable way. Large diameter butterfly valves are usually used in large diameter pipelines long with you over to control the opening and closing of fluids, such as hydroelectric power stations, hydraulic stations, etc.

     

  • NBR Seat Flange Butterfly Valve

    NBR Seat Flange Butterfly Valve

    NBR has good oil resistance, usually if the medium is oil, we will preferably choose NBR material as the seat of the butterfly valve, of course, his medium temperature should be controlled between -30℃~100℃, and the pressure should not be higher than PN25.

  • Electric Rubber Full Lined Flange Type Butterfly Valve

    Electric Rubber Full Lined Flange Type Butterfly Valve

    The fully rubber-lined butterfly valve is a good addition to the customer’s budget when they cannot afford to use 316L, super duplex steel, and the medium is slightly corrosive and in low-pressure conditions.

  • Split Body PTFE Coated Flange Type Butterfly Valve

    Split Body PTFE Coated Flange Type Butterfly Valve

     The split-type full-lined PTFE flange butterfly valve is suitable for medium with acid and alkali. The split-type structure is conducive to the replacement of the valve seat and increases the service life of the valve.

12 Next > >> Page 1 / 2