Products

  • DN100 PN16 Wafer Butterfly Valve WCB Body

    DN100 PN16 Wafer Butterfly Valve WCB Body

    WCB wafer butterfly valve always refer to A105, the connection is multi-standard, be connected to PN10, PN16, Class150, Jis5K/10K, and other standards of pipeline flange, making this product widely used in the world. it is are suitable for medium and high pressure system.

     

  • Fully Lug Butterfly Valve Two Pieces Body

    Fully Lug Butterfly Valve Two Pieces Body

    The two-piece split valve body of the butterfly valve is easy to install, especially the PTFE valve seat with low elasticity and high hardness. It is also easy to maintain and replace the valve seat.

  • GGG50 PN16 Soft Seal Non Rising Stem Gate Valve

    GGG50 PN16 Soft Seal Non Rising Stem Gate Valve

    Due to the choice of sealing material are EPDM or NBR. The soft seal gate valve can be applied at a temperature from -20 to 80°C. Usually used for water treatment. Soft sealing gate valves are available in various design standards, such as British Standard, German Standard, American Standard.

  • DN600 WCB OS&Y Rising Stem Gate Valve

    DN600 WCB OS&Y Rising Stem Gate Valve

    WCB cast steel gate valve is the most common hard seal gate valve, the material is A105, Cast steel has better ductility and higher strength (that is, it is more resistant to pressure). The casting process of cast steel is more controllable and less prone to casting defects such as blisters, bubbles, cracks, etc. .

  • Butterfly Valve Fully Lug Body

    Butterfly Valve Fully Lug Body

    This DN300 PN10 fully lugged butterfly valve body made of ductile iron, and for replaceable soft back seat.

  • Ductile Cast Iron Butterfly Valve Handle

    Ductile Cast Iron Butterfly Valve Handle

    The ductile cast iron butterfly valve is one of the most common and widely used butterfly valves of our material, and we usually use the handle to open and close the butterfly valve below DN250. At ZFA Valve, we have a wide range of handles available in different materials and prices for our clients to choose, such as cast iron handles, steel handles and aluminium handles.

  • DI PN10/16 Class150 Soft Sealing Rising Stem Gate Valve

    DI PN10/16 Class150 Soft Sealing Rising Stem Gate Valve

    Soft sealing gate valve are divided in rising stem and non rising stem. Usually, rising stem gate valve is expensive than non rising stem gate valve. Soft sealing gate valve body and gate are usually made of cast iron and the sealing material is usually EPDM and NBR. Nominal pressure of the soft gate valve is PN10,PN16 or Class150. We can choose the suitable valve according the medium and pressure.

  • SS/DI PN10/16 Class150 Flange Knife Gate Valve

    SS/DI PN10/16 Class150 Flange Knife Gate Valve

    Depending on the medium and working conditions, DI and stainless steel are available as valve bodies, and our flange connections are PN10, PN16 and CLASS 150 and etc. The connection can be wafer, lug and flange. Knife gate valve with flange connection for better stability. Knife gate valve has the advantages of small size, small flow resistance, light weight, easy to install, easy to disassemble, etc.

  • DI CI SS304 Flange Connection Y Strainer

    DI CI SS304 Flange Connection Y Strainer

    Y-type flange filter is a necessary filter equipment for hydraulic control valve and precise mechanical products. It is usually installed at the inlet of hydraulic control valve and other equipment to prevent particulate impurities from entering into the channel, resulting in blockage, so that the valve or other equipment can not be used normally. The strainer has the advantages of simple structure, small flow resistance,and can remove dirt on line without removal.